July 2, 2019
Install the Windows OS on your Nautiz X8 by following the steps below.
- Download OS file, click the download button on this site below.
- Extract the zip file on your PC.
- Copy the PFU file on your Nautiz X8 into the root folder of the internal storage.
- Open file explorer on Nautiz X8, navigate to the root folder and click the PFU file to start the update.
- Read and confirm upcoming messages.
Release notes
- 78.07 C2, 2nd July 2019
– Fixed a bug that the device will not wake up from standby
- 78.07 C1, 20th March 2017
– Fixed a bug that the device is vibrating until booting complete after switching kernel from Android to WEH
– Removed the Windows Live and the Messenger from the Start menu
– Apply AKU 5.3.12.48
– Apply AKU 5.3.12.42
– Applied the Touch mode change function (know as Rain Mode, to get best performance update touch FW see this article) assign F3 as a quick swap between rain mode and normal
– Fixed a bug that the full capacity of the battery was changed if the battery leave for a long time
– Applied does enter suspend in AC mode
– Added “Prevent Auto Suspend” item in the PWC settings
– Applied the default WiFi max power mode
– Added 3 missing buttons in program buttons
– Fixed an issue with camera auto-focus on-screen tab
– Fixed an issue with camera preview and capture while 8x zoom
– Fixed WWAN information shown in DevInfo and Phone
– Removed GPSDemo as a ProgramButtons option
– Fixed a bug that the device couldn’t get GPS data during Verizon CDMA test
– Fixed a bug that the device doesn’t connect to the PC via Activesync after doing SW or HW reset
– Fixed a bug that the GPS data doesn’t transfer when executed Camera app
– Applied the Temperature Demo to NX8
– Fixed a bug that the device doesn’t connect to the PC via Activesync after doing SW or HW reset
– Fixed a bug that sometimes the device doesn’t wake up from standby
– Applied the ‘OK’ key be changed to ‘OK/Close’ key
– Improved the WiFi auto-calibration algorithm
– Changed the action name to ‘F1Key ~ F3Key’ from ‘F1 ~ F3’
– Improved the captured image quality in darkness
– Added the ad-hoc networking API
– Fixed a bug that the device didn’t synchronize to PC with WMDC
– Removed the Touch applet
– Fixed a bug that the SD card shortly disappears after wake-up from suspend
– Modified the display method of azimuth in compass demo
– Fixed a bug that sometimes abnormal data-abort occurred when waking up from suspend
– Fixed a bug that there is no way to activate Verizon without phone dialer
– Fixed a bug that an incorrect picture displayed when connected with WMDC
– Fixed a bug that sometimes the data-abort occurs when GPSDemo is started repeatedly
– Fixed a bug that the device froze up completely during a camera test
– Fixed a bug that the devices start-up randomly in power off mode
– The default date of the system changed to 2015/01/01
– Added function that enables the controls about AC/USB in wakeup source
– Optimized SDRAM timing
– Fixed a bug that the exception occurs when the device wakes up from suspend for a long time
– Fixed a bug that sometimes the audio doesn’t work
– Fixed a bug that the screen stays dimmed although ActiveSync connection
– Added the Expansion 3.3V control when UART Open/Close
– Improved the GPSDemo UI