Windows OS for NAUTIZ X8 Release notes

These are the release notes for the Windows OS for Nautiz X8 article.
  • 78.07  C2, 2nd July 2019
    – Fixed a bug that the device will not wake up from standby
  • 78.07  C1, 20th March 2017
    – Fixed a bug that the device is vibrating until booting complete after switching kernel from Android to WEH
    – Removed the Windows Live and the Messenger from the Start menu
    – Apply AKU 5.3.12.48
  • 78.06, 29th January 2016
    – Apply AKU 5.3.12.42
    – Applied the Touch mode change function (know as Rain Mode, to get best performance update touch FW see this article) assign F3 as a quick swap between rain mode and normal
    – Fixed a bug that the full capacity of the battery was changed if the battery leave for a long time
    – Applied does enter suspend in AC mode
    – Added “Prevent Auto Suspend” item in the PWC settings
    – Applied the default WiFi max power mode
  • 78.05, 21st July 2015
    – Added 3 missing buttons in program buttons
    – Fixed an issue with camera auto-focus on-screen tab
    – Fixed an issue with camera preview and capture while 8x zoom
    – Fixed WWAN information shown in DevInfo and Phone
    – Removed GPSDemo as a ProgramButtons option
  • 78.04, 14th May 2015
    – Fixed a bug that the device couldn’t get GPS data during Verizon CDMA test
    – Fixed a bug that the device doesn’t connect to the PC via Activesync after doing SW or HW reset
    – Fixed a bug that the GPS data doesn’t transfer when executed Camera app
    – Applied the Temperature Demo to NX8
    – Fixed a bug that the device doesn’t connect to the PC via Activesync after doing SW or HW reset
  • 78.03, 1st April 2015
    – Fixed a bug that sometimes the device doesn’t wake up from standby
    – Applied the ‘OK’ key be changed to ‘OK/Close’ key
    – Improved the WiFi auto-calibration algorithm
    – Changed the action name to ‘F1Key ~ F3Key’ from ‘F1 ~ F3’
    – Improved the captured image quality in darkness
    – Added the ad-hoc networking API
    – Fixed a bug that the device didn’t synchronize to PC with WMDC
    – Removed the Touch applet
    – Fixed a bug that the SD card shortly disappears after wake-up from suspend
    – Modified the display method of azimuth in compass demo
    – Fixed a bug that sometimes abnormal data-abort occurred when waking up from suspend
    – Fixed a bug that there is no way to activate Verizon without phone dialer
    – Fixed a bug that an incorrect picture displayed when connected with WMDC
    – Fixed a bug that sometimes the data-abort occurs when GPSDemo is started repeatedly
  • 78.02 4th February 2015
    – Fixed a bug that the device froze up completely during a camera test
    – Fixed a bug that the devices start-up randomly in power off mode
    – The default date of the system changed to 2015/01/01
    – Added function that enables the controls about AC/USB in wakeup source
  • 78.01 19th December 2014
    – Optimized SDRAM timing
    – Fixed a bug that the exception occurs when the device wakes up from suspend for a long time
    – Fixed a bug that sometimes the audio doesn’t work
    – Fixed a bug that the screen stays dimmed although ActiveSync connection
    – Added the Expansion 3.3V control when UART Open/Close
    – Improved the GPSDemo UI
Was this article helpful?
No