NAUTIZ X4 GPS info

Below you’ll find info about the Nautiz X4 GPS.

General information

  • Module: u-blox 7 (G7020)
  • Hardware COM port: COM1:
  • Baudrate: 9600

As soon as you open COM1: by software, the u-blox GPS module is activated. More settings for GPS you find at Settings > System > GPS.

Test the GPS

You can test the GPS by opening Demos > GPS Demo and select UBX GPS with baud rate 9600 and click OK.

Controlling the GPS Module can also be done by software using the Windows Mobile SDK for Nautiz X4.
Was this article helpful?
No
Copyright © 2024 Handheld Group. All rights reserved.
Images, texts and other material downloaded from the Handheld web pages may not be reproduced in any form, without prior written permission from the Handheld Group.
Algiz® and Nautiz® are registered trademarks of Handheld Group AB. l Privacy Policy l Device Policy l GDPR l Legal l