Mounting instructions for ALGIZ 10X WWAN Upgrade

Last updated: January 11, 2023
Related products: Algiz 10X V3

Requirements

  • Tweezer
  • Phillips-tip screwdriver

Instructions

  1. Remove the main battery and open the service hatch window.
    algiz 10x back
  2. Carefully release the two antenna cables from the mainboard using the tweezer.
  3. Insert the WWAN module and fix it with the screw. Connect the grey cable to AUX and the black to MAIN using the tweezer.
    algiz 10x back
  4. Mount the service hatch window and insert the main battery.
Was this article helpful?
No
Copyright © 2023 Handheld Group. All rights reserved.
Images, texts and other material downloaded from the Handheld web pages may not be reproduced in any form, without prior written permission from the Handheld Group.
Algiz® and Nautiz® are registered trademarks of Handheld Group AB. l Privacy Policy l Device Policy l GDPR l Legal