BIOS changes when going from Windows 7 to Windows 10

Below are the changes that need to be performed in the BIOS when you go from Windows 7 to Windows 10 on Algiz 10X V3.

  1. Enter the BIOS Setup menu.
  2. Go into item Miscellaneous Configuration at the BIOS setup menu.
    configurations on screen
  3. Change the OS setting to Windows 8.X.
    configurations on screen
  4. Go to CSM Configuration, change Storage and Video to UEFI.
    configurations on screen
  5. In the Boot option filter change to UEFI only.
  6. Put your install device to Boot Option #1 then you will start the installation process.
Was this article helpful?
No
Copyright © 2023 Handheld Group. All rights reserved.
Images, texts and other material downloaded from the Handheld web pages may not be reproduced in any form, without prior written permission from the Handheld Group.
Algiz® and Nautiz® are registered trademarks of Handheld Group AB. l Privacy Policy l Device Policy l GDPR l Legal