Perform a factory reset on ALGIZ RT7/eTicket

Ensure that you have backed-up all critical data prior to performing a factory reset on your device as a factory reset will erase all data and will be unrecoverable.

The following instructions will assist you in resetting your Algiz RT7/eTicket Operating System and device back to a factory default state.

To perform a factory reset on your device, take the following steps.

  1. Power off the unit.
  2. Hold Volume up and Power button until the unit vibrates.
  3. You should see the Android robot (if you see the recovery menu, skip to step 5).
  4. Hold Power and press Volume up to show the recovery menu.
  5. Use the volume keys to navigate to wipe data/factory reset.
  6. Press Power to select.
  7. Confirm reset and wait for the process to finish.
  8. Select reboot system now.

Once these steps have been completed, your Algiz RT7/eTicketPro device will be at the default factory settings.

Was this article helpful?
No
Copyright © 2023 Handheld Group. All rights reserved.
Images, texts and other material downloaded from the Handheld web pages may not be reproduced in any form, without prior written permission from the Handheld Group.
Algiz® and Nautiz® are registered trademarks of Handheld Group AB. l Privacy Policy l Device Policy l GDPR l Legal