NAUTIZ X8 GPS

Below you’ll find information about the Nautiz X8 GPS.

General information

  • Module: u-blox 7 (G7020)
  • Hardware COM port: COM1
  • Baudrate:9600
  • As soon as you open COM1: by software, the u-blox GPS module is activated.
  • More settings for GPS you find at Settings / System / GPS.

How to test the GPS

  1. Open Demos > GPS Demo.
  2. Select UBX GPS with baud rate 9600 and click OK.

Additional information

Controlling the GPS Module can also be done by software using the Nautiz X8 SDK.

Was this article helpful?
No
Copyright © 2024 Handheld Group. All rights reserved.
Images, texts and other material downloaded from the Handheld web pages may not be reproduced in any form, without prior written permission from the Handheld Group.
Algiz® and Nautiz® are registered trademarks of Handheld Group AB. l Privacy Policy l Device Policy l GDPR l Legal l