Mounting instructions for ALGIZ 8X WAN upgrade

Requirements

  • Tweezer
  • Phillips-tip screwdriver
  • Torx T8 screwdriver

Instructions

  1. Remove the main battery and open the service hatch window.
    top corner of algiz tablet
  2. Carefully release the two antenna cables from the mainboard using the tweezer.
  3. Move the cables to the lower right corner, insert WAN module (modem) and fix it with the screw.top corner of algiz tablet
  4. Connect the grey cable to AUX and the black to MAIN using the tweezer.
    Move the cables under the back cover.

    top corner of algiz tablet
  5. Mount the service hatch window and insert the main battery.
Was this article helpful?
No
Copyright © 2019 Handheld Group. All rights reserved.
Images, texts and other material downloaded from the Handheld web pages may not be reproduced in any form, without prior written permission from the Handheld Group.
Algiz® and Nautiz® are registered trademarks of Handheld Group AB. l Privacy Policy l GDPR l