Create a bootable USB-drive

Create a bootable USB Drive by following the instructions below.

  1. Download the HPUSBFW file provided at the bottom of this page.
  2. Start the HP USB Disk Format tool (HPUSBFW.exe). Right-click the file and Run as Administrator.
    windows settings
  3. Select your USB Drive in the Device drop-down menu.
  4. The file system should be Fat32.
  5. Check the boxes Quick Format and Create a DOS startup disk.
  6. Select the provided BootImg folder containing the DOS files.
    windows settings
  7. Press the Start button and wait for it to complete.
Was this article helpful?
No
Copyright © 2023 Handheld Group. All rights reserved.
Images, texts and other material downloaded from the Handheld web pages may not be reproduced in any form, without prior written permission from the Handheld Group.
Algiz® and Nautiz® are registered trademarks of Handheld Group AB. l Privacy Policy l Device Policy l GDPR l Legal