ALGIZ 10X V1 COM port assignment

The COM-Ports in the Algiz 10X V1 are assigned as follows:

  • COM1: Serial port on the left side of the device
  • COM2: Internal UART interface
    port details
  • COM3: u-blox GPS at 9600 baud
  • COM4: Serial port on Vehicle cradle (Only available if a powered vehicle cradle is connected)
  • COM5 (Next to LAN connector): Serial port on Vehicle cradle (Only available if a powered vehicle cradle is connected)
Was this article helpful?
No
Copyright © 2019 Handheld Group. All rights reserved.
Images, texts and other material downloaded from the Handheld web pages may not be reproduced in any form, without prior written permission from the Handheld Group.
Algiz® and Nautiz® are registered trademarks of Handheld Group AB. l Privacy Policy l GDPR l