COM port assignment

Support Article No. 3956
Latest updated: 9/4/2014

ISSUE:

You would like to know the Com Port Assignments for the Algiz 10x V.1

Solution:

The COM-Ports in the Algiz 10X V.1 are assigned as follows:

  • COM1: Serial port on left side of the device
  • COM2: Internal UART interface
  • COM3: u-blox GPS at 9600 baud
  • COM4: Serial port on Vehicle cradle
    (Only available if a powered vehicle cradle is connected)
  • COM5: Serial port on Vehicle cradle (Next to LAN connector)
    (Only available if a powered vehicle cradle is connected)