Turn on unit when power is connected

Support Article No. 23443
Latest updated: 9/5/2017

This feature let's you configure the Algit RT7 to start as soon as power / charger is connected.

This settings can only be set in fastboot mode. This means that you'll need both the fastboot command (download here) and the adb/fastboot driver (download at KB3742) installed on your system.

Enter fastboot mode

Connect the unit via USB with your PC. Switch off the unit and press volume low button along with power button to enter fastboot. You should see the handheld logo with "FASTBOOT" written on the top.

Enable the boot on charge mode

Run the following commands from you PC while to unit is in fastboot mode:

fastboot oem disable-charger-screen
fastboot reboot

Disable the boot on charge mode

Run the following commands from you PC while to unit is in fastboot mode:

fastboot oem enable-charger-screen
fastboot reboot

Other commands

fastboot oem device-info This command shows the current status of the charger screen
fastboot oem enable-charger-screen This command enables the charger screen
The unit will NOT start when connected to charger
fastboot oem disable-charger-screen This command disables the charger screen
The unit will start when connected to charger
fastboot reboot This command reboots the device and starts android
fastboot oem help This command prints all the available commands