Instructions for OS update

Support Article No. 2193
Latest updated: 8/12/2014

Requirements

You will require a SD card that is formatted as FAT16 and is not larger then 2GB (no SDHC cards
are usable).

Information

Remember to backup your data before upgrading as it will wipe out all the existing data on the device.

Instructions

  1. Download the OS version you want to install from the Download-Tab over here.
  2. Make sure AC is plugged and Nautiz X7 is charged in case of possible severe firmware damages.
  3. Delete all files on SD memory card.
  4. Copy the file "VEBOOT.nb0" from folder "1. uP Update" to SD memory card.
  5. Insert SD-memory card in Nautiz-X7 as shown below:

    Figure 1. Insert SD card from the socket at top of the device
  6. Hold “Right Soft” & “Action” keys at the same time and then press “Power” key to power up the
    device. Release “Right Soft” & “Action” keys when screen comes alive.
  7. Power off the system manually by removing the battery after files loaded.
  8. Delete all files on SD memory card.
  9. Copy the file "MicroP.ubn" from folder "2. uP Update" to SD memory card.
  10. Hold “Right Soft” & “Action” keys at the same time and then press “Power” key to power up the
    device. Release “Right Soft” & “Action” keys when screen comes alive.
  11. Power off the system manually by removing the battery after files loaded.
  12. Delete all files on SD memory card.
  13. Copy all 4 files from folder "3. OS Update" to SD memory card.
  14. Hold “Right Soft” & “Action” keys at the same time and then press “Power” key to power up the
    device. Release “Right Soft” & “Action” keys when screen comes alive.
  15. The update process is completely finished and the unit is ready to go.