Rain/Wet Mode

Support Article No. 19051
Latest updated: 2/8/2016

The rain/wet mode feature significantly improves the performance of the Nautiz X8 unit while used in rainy or wet enviroments. When enabling the rain/wet mode the touch sensitivy is lowered thus making it less likely to react on the conducting water. 

Make sure you install the latest OS and touch firmware to enable the use of rain/wet mode.

Latest OS for your unit:
KB 11442 Windows
KB 11453 Android

Latest touch firmware for your unit:
KB 17816 Windows
KB 17821 Android

NOTE: While rain/wet mode is enabled NX8 orginal stylus pen will be un-usable.

Windows

When you have installed the latest OS and touch firmware update for your unit you can enable the rain/wet mode by going to:
Settings -> System -> Touch -> Enable Rain/Wet mode

When you would like to use the rain/wet mode you can click the "F3" hotkey on the keyboard to enable/disable the mode. When enabled you will see a small blue icon in the top toolbar of your unit, see picture below. When disabled the icon will dissapear.

WEH rain/wet

Android

When you have installed the latest OS and touch firmware update for your unit you can enable the rain/wet mode by going to:
Settings -> Display -> Enable Rain/Wet mode

When rain/wet mode is enabled a small blue icon will appear in the toolbar. See picture below. By default there is no hotkey bound to enable/disable this. If you would like to assign a hotkey, go to:
Tools -> Program Buttons

android rain/wet